Herreshoff #191902es [Sailing Cutter for #827s Ohonkara]
Particulars
Type: Colonia Sailing Cutter
Designed by: NGH
Finished: 1919-2-7
Construction: Wood
LOA: 16' 10" (5.13m)
Beam: 5' 0.5" (1.54m)
Centerboard: yes
Built for: Tucker, Carll
See also:
Note: Particulars are primarily but not exclusively from the HMCo Construction Record. Supplementary information not from the Construction Record appears elsewhere in this record with a complete citation.
Model
Model location: H.M.M. Model Room East Wall
Vessels from this model:
36 built, modeled by NGH
Original text on model:
"Sailing dingy for COLONIA July 1901 1/12
Numbers 217 and 218 (1903) frame spaces 8 1/2" instead of 7 1/2" raised 1/2" stem 6" aft flared out to 5' 5" beam Model cut away forward and remeasured before #218 set up Dec. 1901
1923 (01?) sailing cutter for ROAMER 1925 sailing cutter for Rob. Tod 1926 sailing dinghy for Charles Goodwin." (Source: Original handwritten annotation on model. Undated.)
Model Description:
"#568 17'3" loa sailing dinghy of 1901 for the cutter Colonia. Also, with modifications, #217 Maisie and #218 Carmen, 20 loa electric launches of 1901, sailing cutter for the steam yacht Roamer, sailing cutter for the schooner Katoura, and sailing dinghy for Charles Goodwin." (Source: Bray, Maynard. 2004.)
Note: Vessels that appear in the records as not built, a cancelled contract, a study model, or as a model sailboat are listed but not counted in the list of vessels built from a model.
Drawings
List of drawings:
Drawings believed to have been first drawn for, or being first referenced to
Herreshoff #191902es [Sailing Cutter for #827s Ohonkara] are listed in bold.
Click on Dwg number for preview, on HH number to see at M.I.T. Museum.
-
Dwg 028-043 [076-109] (HH.5.02042); Construction Dwg > 16'-10" x 5'-0 1/2" Sailing Cutter for # 719 (1913-03-03)
-
Dwg 028-043 [076-109] (HH.5.05560); Construction Dwg > Sailing Cutter for # 719 (16'-10" x 5'-0 1/2") (1913-03-03)
Note: The Haffenreffer-Herreshoff Collection is copyrighted by the Francis Russell Hart Nautical Collections of the MIT Museum in Cambridge, Mass. Permission to incorporate information from it in the Herreshoff Catalogue Raisonné is gratefully acknowledged. The use of this information is permitted solely for research purposes. No part of it is to be published in any form whatsoever.
Supplement
Research Note(s)
"2/7 [19]19 [When built]. 827 [For Yacht (Ohonkara)]. Same as 719 [For Vagrant II]. 16'-10" x 5 1/2" Sailing Cutter. Frame spacing 7 1/4". Planking, white cedar, 5/16" full lapped. Thwarts mahogany 7/8", double kneed. Floor boards, cypress. Deck cedar 5/16" thick canvas covered. W.T. bulkheads 5/32" cedar 5/32" mahogany. All trimmings of mahogany. 2 color pole sockets. Wash boards mahogany. Centerboard 5/8" oak. Length of centerboard 3' 6". Bronze wire rope traveller over tiller. For [rigging] details see [drawing] 79-85 [as per notes on drawing 28-43]." (Source: van der Linde, Claas. October 26, 2009.)
"This vessel's building date was determined from notes on the original plan. Plan 28-43 (formerly 76-109) from which this boat was built was drawn 1913-03. #827s Ohonkara (for which this vessel was built) was contracted for 1919-07-28. " (Source: van der Linde, Claas. October 26, 2009.)
Note: Research notes contain information about a vessel that is often random and unedited but has been deemed useful for future research.
Note
We are always interested in learning more about this vessel. If you want to discuss it or can share any additional information or images or to discuss a copyright concern, please do not hesitate to send an Email to the link below!
Herreshoff Catalogue Raisonné.
All rights reserved. No reproduction, adaptation, or distribution of any part of this document or any information contained herein by any means whatsoever is permitted without prior written permission. For the full terms of copyright for this document please click here. Last revision 2024-01-16.
© 2024,